PORSCHE 924 EXHAUST O RINGS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell hdl German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming not ne...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,665.10
Make a selection
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,792.70
Make a selection
Our 18-piece clutch package contains everything we use in our shop for a perfect clutch replacement. beware of lesser kits, you will need all of these parts! Included is the clutch installation manual. Kit includes: rear main seal, throwout bearing, 2 throwout bearing clips, flywheel, front trans. Seal, 2 cv joint gaskets, flywheel o-ring, ball stud cup, 2 muffler gaskets, needle bearing, cv joint bolt, clutch alignment tool, flywheel crush washer, felt washer, pressure plate, clutch disc, clutch installation manual.
Kit consists of:
1 - b022105273a - Porsche 914 215mm stock replacement forged flywheel - aa performance - normally $299.99
1 - r90111608111 - sachs clutch release bearing - normally $185...(choose a part on the right to read more)
General Fitment 914 1970-76
- equal length headers with long tube design - 200 cell German hjs hf sport catalysts with u torque design - 2 3/4 tubing (70mm) - rsr style connections and quick release clamps - quad 3.5 (90mm) round tips - made in Germany -+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. - weighs 62 lbs.(28,0 kg). Please note: this exhaust is a special order item ! Typically lead time is 2-3 weeks from Germany. Performance gains (includes FVD software, sport airfilter and exhaust):, based on the 3.8 l: max. Power - 283kw (385hp) @ 6500rpm max. Torque - 441nm (325lbf ft) @ 4000rpm max. Speed - 307km/h max. Rpm - 7900rpm acceleration 0-100km/h - 4.4s our Brombachersystem uses 2 ¾ inch (70mm) tubing and is modula...(choose a part on the right to read more)
$9,220.20
Make a selection
"brombacher" exhaust system for 997 GT3/rs (sound version) with rsr style tips
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 71 lbs. (32,2 kg)
- 15.5 lb (7 kg) weight savings over stock
- t 316 stainless steel for improved durability over t 304
- includes all necessary clamps and mounting brackets
- 2 x 2 3/4" (70mm) angle cut rsr center exit tips
- made in Germany
- 98 db (98db at idle and partial throttle, builds to 100db at wot)
- intoxicating growl at idle, partial throttle and wide open ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$8,507.40
Make a selection
"brombacher" titanium race system (sound version) for GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are nearl...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
+650hp 997 tt (sound version) stainless steel exhaust system
The +650 hp FVD sport exhaust system is specially designed for vehicles with performance increases of more than 485kw (650ps). Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 35 lbs. (16,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit. However, we do not recommend the use of stock ti...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,049.20
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version) in titanium
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 17 lbs. (7.7 kg)
- replaces stock side mufflers and stock center muffler
- 47 lbs (21.3 kg) savings over stock system!
- 1,000 degree celcius titanium
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
All titanium systems are not created equal. The titanium that we use is the highest grade ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$6,107.20
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
"brombacher" 997 tt (sound version) titanium 4 chamber exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts with titanium outer shell
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9kg)!
For comparison the stainless version weighs 51 lbs. (23 kg)
- 1000 degree celcius, high grade titanium material
- 4 x 3.25"(80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary...(choose a part on the right to read more)
General Fitment 911 2005-08
$12,320.00
Make a selection
Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added benefit is that ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $5,815.70
Make a selection
Brombacher titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
This system is complete from titanium because it is without any catalytic.
. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat value titanium available (1000 degrees celcius) and has a much greater wall thickness than 75% of the systems on the m...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$8,972.70
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
"brombacher" titanium race system (sound version) for 2010 GT3/rs
Facts:
- + 20 crank hp & + 19 crank torque.
- complete system in titanium (without sidemufflers)
- 200 cell high flow, titanium tri metal German hjs sport catalysts
- 2 x 90mm tailpipes.
- weighs 28.6 lbs (13kg)!
- 1000 degree celcius, high grade titanium material
- 105-107 db
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
The titanium tips can be ordered ?flamed? Which exhibit?s the blue tint.
All titanium systems not created equal! Brombacher exhausts systems are ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$13,066.90
Make a selection
Brombacher 997.2 tt "sport stock" stainless steel, cat bypass for OEM muffler facts: - + 21 crank hp & + 18 crank torque** - reuses OEM muffler, perfect for those looking for more sound and power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 6 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell or 200 cell. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programmin is necessary. - reuses OEM tips. FVD i...(choose a part on the right to read more)
Brombacher 997.2 tt "sport " stainless steel, sport cat converter replacements for our bes- muffler facts: - + 21 crank hp & + 18 crank torque** - 200 cell "hd", tri metal German hjs sport catalysts - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - reduces backpressure and thermal stress - 5 on a scale of 1-10 in volume (1 being stock). - reuses OEM v band style connecting hardware. - made in Germany. - available in 100 cell and cat bypass. Please ask your sales person for pricing. - more distinguished growl at idle, partial throttle and wide open throttle. - dme programming not necessary. - reuses OEM ti...(choose a part on the right to read more)
$4,303.20
Make a selection
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design
Features:
Improves exhaust flow and sports car sound
Adds 15 whp greatly improving throttle response
Saves 11 bs from rear of car
Optimized for use at high-rpm during track and motorsport events
Complete t304l stainless steel construction; 14-16ga cnc mandrel-bent 2.25 tubing
Direct replacement for the factory mufflers
Includes removable turndowns that are easy on & easy off for lowering the exhaust volume when desired
All fabspeed performance products are backed by the fabspeed lifetime limited warranty
...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,095.00
Make a selection
FVD primary muffler bypass system for 2009- 997/997s
Fit with and without factory sport valved exhaust !
Facts (based on 997s):
- + 5 crank hp & + 4 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 5.5 lbs weight savings
- t 316 stainless steel for improved durability over t 304
- adjustable design for easy installation
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
- fits with or without sound switch system
- weight: 4.6kg (10.14lbs)
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,543.30
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Brombacher 997.2 tt "sport stock" (TUV version) muffler for OEM cats
Facts:
- + 6 crank hp & + 5 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 3 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:the 99...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Product details:
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
-fits all Porsche 996 Carrera vehicles 1998-2005
-increases horsepower and torque by 8 whp and 16 ft-lbs
-saves 21 lbs from the rear of the vehicle
-dramatically reduces backpressure and improves exhaust flow and sports car sound
-includes fabspeed's deluxe quad-style tips available in polished or black chrome. Please indicate your year when ordering.
-direct replacement for the factory mufflers; compatible with the factory OEM cats or fabspeed’s sportcat or cat bypass ...(choose a part on the right to read more)
General Fitment 911 1998-05
$1,895.00
Make a selection
"brombacher" sport muffler for 997gt3/rs (sound version) in titanium
Facts:
- + 10 crank hp & + 10 crank torque
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 17 lbs. (7.7 kg)
- replaces stock side mufflers and stock center muffler
- 47 lbs (21.3 kg) savings over stock system!
- 1,000 degree celcius titanium
- 2 x 3.5"(90mm) round tips
- includes all necessary clamps and mounting brackets
- made in Germany
- 105 db
- intoxicating cup car growl at idle, partial throttle and wide open throttle
- no dme programming necessary, does not alter emissions, 50 state legal in the u.s.
All titanium systems not created equal the titanium that we use is the highest grade avail...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$6,605.50
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|